-
A
dry blend which rapidly establishes comprehensive biological
filtration, providing a host of non-pathogenic, heterotrophic aerobic
and anaerobic microorganisms (nitrifiers, denitrifiers, as well as
species which focus on remineralization of latent organic material).
-
Aggressively reduces ammonia, nitrite, nitrate, and phosphate.
-
Increases average ORP.
-
Improves light penetration.
-
Enhances protein skimmer efficiency.
-
Reduces POM, DOM, and DIN
-
To inoculate newly-established systems, 1 g per 200 gal., repeated after 7 days.
-
Maintenance: 1 g per 500 - 750
gallons (1,893 - 2,839 L) per week, or 1 g per 3,500 - 5,000 gallons
(13,248 - 18,925 L) per day.
-
Mix Isol8 into system water, per instructions presented in 'Application' section, below.
ApplicationKeep
out of reach of children and unauthorized persons. Avoid contact with
skin, eyes, and mucous membranes. Store in a cool, dry location away
from sunlight.
Inocul8 is a dry, free-flowing formula consisting of non-pathogenic, heterotrophic aerobic and anaerobic
microorganisms, dominated
by nitrifiers and denitrifiers, for the purpose of establishing
comprehensive biological filtration in recirculating ecosystems. Per
unit mass applied, Inocul8 is more effective at reduction of nitrogen
compounds than is Remedi8 (which is more effective at reduction of
latent organic matter, in general, than is Inocul8); accordingly,
Inocul8 may be utilized to combat acute spikes in concentrations of
ammonia, nitrite, and/or nitrate.
Maximum
effectiveness is achieved within 12 months of manufacture date. This
formulation does not incorporate preservatives, however refrigeration is
not required. Unused contents of container should be protected from
exposure to atmospheric moisture and other contaminants.
To
inoculate: 1 g / 200 gal.; repeat once after 7 days. To expedite
nitrogen cycle, apply in conjunction with aCtiv8, which provides
necessary organic carbon and ensures rapid microbial colonization.
Maintenance:
1 g / 500 - 750 gal. weekly, or 1 g / 3,500 - 5,000 gal. daily.
Monitor system nutrient balance. Adjust dosage accordingly.
Recommended
is to mix the required mass of Inocul8 to be dosed within 24 h with
system water (the volume of water used need only be enough to form a
fluid suspension; the precise volume is not important) in a clean
vessel, and dispense the resulting suspension into an out-current water
flow within the main body of the recirculating system. Avoid dispensing
the suspension near drains and pump intake ports. If the suspension is
to be kept ≥24 h, then refrigerate. Do not mix with low-TDS water
(e.g. purified).
Depletion
of available carbon, nitrogen, and phosphorus will negatively impact
the growth of cohorts consisting in part or entirety of phototrophs;
this includes plants, algae, zooxanthellate cnidarians, and poriferans
hosting symbiotic zoochlorellae. Monitor nutrient concentrations and
note apparent related impacts on cohort appearance and biomass. Adjust
nutrient content in system as necessary to maintain desired cohort
appearance and growth rates. DisclaimerNotice:
It is not possible to eliminate all risks associated with the use,
handling, or storage of this product. Ineffectiveness, injury to crops
and/or livestock, or other unintended consequences may result due to
factors outside the control of Captiv8 Aquaculture or the seller. Buyer
or user shall assume all such risks. For details, go to Terms and Conditions. Consult SDS before use.
Disclaimer: Captiv8
Aquaculture warrants that this product conforms to the description, and
is reasonably fit for the purposes described, on its label. In no event
shall Captiv8 Aquaculture or the seller be held liable for any
incidental, consequential, or special damages, loss, or injury,
including, without limiting, lost profits, resulting from the use or
handling of this product. The exclusive remedy of the buyer or user for
all claims shall be the return of the purchase price of this product.
Express and implied warranties are disclaimed. Captiv8 Aquaculture does
not authorize any agent or representative to make any other warranty,
guarantee, or representation concerning this product.
|