VarioS-4 Water Pump Specs
Output thread size: 32mm/1in
Inlet thread size: 1.25in male union thread
Outlet Barb Size: 3/4in
Dimensions: 3.75in(W) x 5.7in(L) x 5.5in(H)
Voltage: DC 24V
Power Consumption: 40w watts at max power
Max flow: 1056gph*
Max Head Height: 14.7ft*
*results will vary depending on aquarium setup
Note: THIS IS NOT A PRESSURE RATED PUMP. This
pump is not ideal for second floor applications or to feed Beckett or
downdraft skimmers where consistent pressure is necessary.
- Safe and Efficient 36 Volt Operation
- 5 Controllable Energy Saving Power Settings
- Detachable Controller with Waterproof Union
- Safety Float Switch
- 0-10v Input for 3rd Party Controller
- Integrated Memory
- Two different pause/feed modes that will shut off the pump for either 15 or 60 minute intervals.
- Super Quiet Operation
- True Slow Startup
- Submersible or External Applications
- Comes with intake screen and plumbing attachments
The Reef Octopus VarioS water pump features a
detachable controller module, high quality ceramic shaft and propeller
bearing to reduce wear and tear, and the latest variable speed flow
technology for refined control, enhanced performance, energy-efficiency
and safer operations.
Unlike the vast majority of circulation pumps which uses alternating current (AC), the VarioS pump
boasts several key advantages over traditional AC pumps, namely, higher
energy efficiency, safer operations at a working voltage of 36V and
most notably, the variable speed control to adjust the ideal mix of air
and water flow into the skimmer. Direct current pumps have several key advantages over traditional AC pumps. Most notably, you can control the rotational speed of the motor, thus electronically control water flow rates. DC pumps are also more efficient than AC pumps and produce less heat per volume of flow.
>>> Now the aquarist can have full control of
the water flow through their sump, reactors, filters or closed loop
systems!!!
REFINED CONTROL
In addition to allowing the pump to run at 5 different speeds, which
is pretty normal for a DC pump, the new VarioS Controller takes the pump
to a new level featuring:
- A float switch connection, which allows you to connect a float
switch (included in the box) to the controller. This is an added
security feature that allows you to shut off the skimmer pump when your
waste collector is full or shut off your water pump when your sump water
has reached a high or low level. In all, you don't need another module
or controller to add a float switch to your system.
- Two different pause/feed modes that will shut off the pump for
either 15 or 60 minute intervals. These come handy when you are feeding
the tank or conducting regular maintenance such as a water change.
- And the best feature of the VarioS controller is a 0-10v input
which will allow a 3rd party controller such as Neptune System's APEX or
Reef Angel to take over the pump and tell it what to do. In this mode,
the new VarioS controller becomes an interface between the system
controller and the pump allowing you to create intricate programs using
your system controller native language. This is unprecedented
controllability on a skimmer or water pump. In essence, you can use your
system controller as your DC pump controller!
Includes: VarioS-6 pump, controller, float switch,
power supply, 1in output and input union for plumbing direct PVC,
versatile stepped barb output fitting for flex tubing and protective
intake screen.
The VarioS pump features a
true slow startup where the pump slowly ramps up from zero RPM to the
full preset speed over a period of approximately 10 seconds.
The pump and controller
are connected via a waterproof 3-conductor union. The detachable
controller will allow for a simple waterproof union. The volute can
rotate to change the pump's output orientation in 90 degree intervals, meaning users can output water vertically (up or down) as well as horizontally.
Warranty
- 2 year coverage on pump/1 year on rotor
Reef Octopus can not be responsible for consequential damages arising
from installation or use of this product. Reef Octopus warrants the
pump to be free from defects in material and workmanship under normal
use and conditions for the warranty period from the date of purchase.
CoralVue liability under this warranty shall be limited to repairing or
replacing at CoralVue's discretion, without charge. CoralVue will not be
liable for any cost of removal, installation, transportation, or any
other charges which may arise in a warranty claim.
NOTE: This warranty is void if the product is
damaged through abnormal operating conditions, accident, abuse, misuse,
unauthorized alteration or repair. This warranty is valid only in North
America and is non-transferable. Consumable spare parts are not
applicable to the warranty.