RowaPhos
Feed Your Fish and Not Your Algae
Rowaphos is the professional method of removing Phosphate and Silicate in all types of Aquariums and Ponds.
RowaPhos is guaranteed to remove more phosphate than any other product worldwide.
In freshwater or salt water aquariums phosphates will feed nuisance algae which can overrun plants and expensive corals spoiling the aesthetics of the tank and in extreme cases killing its inhabitants.
Within the reef aquarium, phosphates will greatly affect the
formation of coral skeletons by reducing calcification by over 50% and
by inhibiting the deposition of strontium. It is suggested by Borneman
that phosphates are a direct poison to calcification.
RowaPhos is a unique and patented,
man made ferric hydroxide material chemically engineered for the
efficient removal of phosphates, arsenic and silicates from fresh and
salt water, having initially been developed in Germany for treating
mains water supplies.
RowaPhos should not be confused with natural materials, which are
generally based on aluminium oxide, (zeolite) or even other iron based
products which claim to be the same product from other manufacturers.
Only Rowa make RowaPhos and any other iron based material is simply a
copy with a completely different chemical structure and properties.
RowaPhos has the largest absorption ability of any phosphate product
worldwide and will not leach back in to the water. This saves the need
for immediate removal once the media is exhausted. The product is easy
to use and will improve the water quality wherever Phosphate or Silicate
is a problem.
It is of interest to Marine and Reef Aquariums where its unrivalled
capabilities have shown it to be extremely beneficial in the control of
nuisance algae's and the growth of hard corals.
Constant use of the product is recommended, as its abilities to control nuisance algae is a major benefit.
In an independent series of tests carried out by the Berlin Technical
University on the five most commonly used phosphate removers at that
time, RowaPhos was found to be the most efficient in removing phosphate
from water. Other medias tested reached only to 30 - 40 % of its removal
capacity by weight. Additionally RowaPhos was found to continue to
remove phosphates at lower concentrations and had a higher maximum
holding capacity.
Since these tests many ferric products have been brought out
which ride on the performance of the Rowa product and some even claim to
be the same, however RowaPhos UNIQUE and its patented manufacturing
process cannot be copied
Article No.
|
Description
(Conversion 4.5 Litres = 1 Gallon)
|
Fresh
Water
|
Salt
Water
|
RP10
|
100 ml tub of RowaPhos
Will remove 3 ppm of phosphate (PO4) from the following volume of water -
|
800 Ltrs (175 gals) (200 USG)
|
400 Ltrs
( 88 gals ) (100 USG)
|
RP25
|
250 ml tub of RowaPhos
Will remove 3 ppm of phosphate (PO4) from the following volume of water -
|
2,000 Ltrs
(440 gals) (500 USG)
|
1,000 Ltrs
(220 gals) (250 USG)
|
RP50
|
500 ml tub of RowaPhos
Will remove 3 ppm of phosphate (PO4) from the following volume of water -
|
4,000 Ltrs
(880 gals) (1,000 USG)
|
2,000 Ltrs
( 440 gals ) (500 USG )
|
RP100
|
1 ltr bucket/tub of RowaPhos
Will remove 3 ppm of phosphate (PO4) from the following volume of water -
|
8,000 Ltrs
(1,760 gals) (2,000 USG)
|
4,000Ltrs
(880 gals) (1,000 USG)
|
RP500KG
|
5 Kg bucket/tub of RowaPhos
Will remove 3 ppm of phosphate (PO4) from the following volume of water -
|
36,000 Ltrs
(8,000 gals) (9,000 USG)
|
18,000 Ltrs
(4,000 gals) (4,500 USG) |
|